Anime Central Forums: The 2014 Prop Acceptability Checklist - Anime Central Forums

Jump to content

  • 4 Pages +
  • « First
  • 2
  • 3
  • 4
  • You cannot start a new topic
  • You cannot reply to this topic

The 2014 Prop Acceptability Checklist Read me, please! I have good info for you!

#91 User is online   Jos 

  • Regular
  • PipPip
  • Group: Regular
  • Member No.: 64919
  • Posts: 165
  • Joined: 13-January 14
  • Location:Iowa

Posted 10 February 2014 - 08:50 PM

Once I finish the costume i'll have to take measurements.. the thing is though, since the head will be placed on the helmet.. it might reach past 6 inches, but it will be held against my body and not dragged behind i guess i'm just confused about this one specific rule. my apologies =x

#92 User is offline   Valkyrie 

  • Exhibit Space ADH
  • PipPipPipPip
  • Group: Assistant Department Head
  • Member No.: 3041
  • Posts: 1,276
  • Joined: 21-September 04
  • Location:Mundelein, IL

Posted 11 February 2014 - 11:56 AM

Whether it drags behind or is stationary, costume parts can only extend 6 inches from your body. For instance, if someone is wearing shoulder armor over a cape, that armor can only reach 6 inches away from the cosplayer's shoulder. So if your antlers reach longer than 6 inches, then they will have to be trimmed down.
ACen 2009 - Merchandising Staff
ACen 2010 - IRT Operative
ACen 2011-2013 - IRT Dispatch
Callsign: Valkyrie
"There is only one god. And his name, is Death. And there is only one thing we say to Death: 'Not today.'"

#93 User is offline   WatchJessieGo 

  • Regular
  • PipPip
  • Group: Regular
  • Member No.: 63035
  • Posts: 138
  • Joined: 19-January 13

Posted 02 March 2014 - 12:32 PM

I have another question regarding arrows and such. I know there are no loose arrows allowed, but what if I were to somehow attach them to the bottom of my quiver? Maybe with gorilla glue something so that I wouldn't be able to pull them out?

If not, does anybody have any ideas as to what I could do to make it look like I have arrows in my quiver for aesthetics' sake? An empty quiver is kind of silly. ^^"

EDIT: Nevermind, someone on coscom gave me a good idea. Want to make sure it's acceptable, though. Taking a circular piece of cardboard and putting it in my quiver, then hotgluing the upper tips of the arrows on top. Would that be okay?

Also, whatever ends up being acceptable, is there any way to show that the prop has been approved so I don't keep getting stopped by staffers thinking I have loose arrows in my quiver?

EDIT 2: Ooooorrr, what if I permanently glue all the arrows together into one big massive hunk that would just be too heavy to shoot?

This post has been edited by WatchJessieGo: 02 March 2014 - 01:07 PM

ACen 2015 cosplay:

Friday - Mayoi Hachikuji (Bakemonogatari)
Saturday 1st half - Nona (Death Parade)
Saturday 2nd half - Nagisa Momoe (Madoka Magica)

#94 User is offline   Valkyrie 

  • Exhibit Space ADH
  • PipPipPipPip
  • Group: Assistant Department Head
  • Member No.: 3041
  • Posts: 1,276
  • Joined: 21-September 04
  • Location:Mundelein, IL

Posted 26 March 2014 - 11:18 AM

Okay, got the word back from my higher ups. Here are the only two things you need to be sure of for your arrows, bow, and quiver:

1) As long as none of the arrows come out, you can do as you please with the quiver.

2) You'll need to make sure your bow is unstrung or strung very loosely.

Hope that helps!
ACen 2009 - Merchandising Staff
ACen 2010 - IRT Operative
ACen 2011-2013 - IRT Dispatch
Callsign: Valkyrie
"There is only one god. And his name, is Death. And there is only one thing we say to Death: 'Not today.'"

#95 User is offline   XxNightrayLovexX 

  • Bigfoot
  • Pip
  • Group: Bigfoot
  • Member No.: 63359
  • Posts: 60
  • Joined: 24-March 13

Posted 09 April 2014 - 08:53 PM

I've read the rules a billion times over, but even so want to clarify. I'm making Ryuuko Matoi's scissor blade. I have the blade outline measured at 5 feet. I'm 5'4. To clarify, is this acceptable, before I actually start tracing it onto wood?
"Although I’m weak and full of flaws, I will never stop moving forward. No matter who I am, no other than myself will create my own existence. No matter what others may think or feel, I will still move forward as myself.” - Oz Vessalius <3

~ACen 2013/2014 Cosplay~
Kuroko Tetsuya (KnB) and Ryuuko Matoi (Kill la Kill)

~ACen 2015 Cosplay~
Ryuuko Matoi (Kill la Kill); Kuroko Tetsuya (Kuroko no Basuke); Kuroo Tetsurou (Haikyuu!!); Shinkai Hayato, Arakita Yasutomo, and casual Hajime (Yowamushi Pedal)

#96 User is offline   Valkyrie 

  • Exhibit Space ADH
  • PipPipPipPip
  • Group: Assistant Department Head
  • Member No.: 3041
  • Posts: 1,276
  • Joined: 21-September 04
  • Location:Mundelein, IL

Posted 09 April 2014 - 09:18 PM

Yup, that's fine! :)
ACen 2009 - Merchandising Staff
ACen 2010 - IRT Operative
ACen 2011-2013 - IRT Dispatch
Callsign: Valkyrie
"There is only one god. And his name, is Death. And there is only one thing we say to Death: 'Not today.'"

#97 User is offline   Jawahater 

  • Newbie
  • Pip
  • Group: Newbie
  • Member No.: 62984
  • Posts: 4
  • Joined: 09-January 13
  • Location:Homer Glen IL

Posted 10 April 2014 - 06:23 PM

since airsoft is allowed back in the con i have a question regarding it, i plan on bringing my G&G Rifle with me (has a blazing orange tip and barrel cover) and is there a certain ruling about what accessories we can put on our rifles? i,e ACOG/Red dot sights, flashlight, grips ect
-----------------------------------------------------------------------
Anime and Airsoft <3
Conqurer of the Sith Empire
Savior Of the Jedi Order
"It's called a hologram. This is called a trap. And I'm calling you dead."- Boba Fett

#98 User is offline   Valkyrie 

  • Exhibit Space ADH
  • PipPipPipPip
  • Group: Assistant Department Head
  • Member No.: 3041
  • Posts: 1,276
  • Joined: 21-September 04
  • Location:Mundelein, IL

Posted 10 April 2014 - 09:05 PM

The only rules regarding airsofts are thus:

1) They must have an orange tip - which you've got covered~
2) They must be disabled and unable to fire - this can be done with a ziptie pulling and holding back the trigger
3) They must be unloaded and you may not carry ammo/magazines/cartridges on your person

Other than that, have fun! (Just make sure to be polite when using the lights, of course)
ACen 2009 - Merchandising Staff
ACen 2010 - IRT Operative
ACen 2011-2013 - IRT Dispatch
Callsign: Valkyrie
"There is only one god. And his name, is Death. And there is only one thing we say to Death: 'Not today.'"

#99 User is offline   Iris 

  • Regular
  • PipPip
  • Group: Regular
  • Member No.: 3989
  • Posts: 196
  • Joined: 08-March 05
  • Location:Cornfields of southern IL

Posted 11 April 2014 - 07:20 AM

I've got a kind of strange request/question.

In the past I know there has been issues with people throwing confetti inside the buildings (obviously!). Would it be allowed (or more like am I going to get in trouble) if I brought some Eco-confetti for outdoor shoots/photoshoots only? Never to be used inside, and the stuff used outside dissolves on it's own in water come the next rain/sprinkler/whatever?


It's used in a weddings a lot (including places that don't allow traditional confetti or rice) and here is some info regarding it -
"4. How long does it take for ecoparti ecofetti to disintegrate?
Ecofetti is a unique starch-based material. When wet, it will begin to dissolve right away. Usually it will be completely dissolved within 48 hours, but the speed depends on water temperature and the volume of confetti. Traditional rice and special 'designed' rice take weeks to dissolve..."

#100 User is offline   XxNightrayLovexX 

  • Bigfoot
  • Pip
  • Group: Bigfoot
  • Member No.: 63359
  • Posts: 60
  • Joined: 24-March 13

Posted 14 April 2014 - 11:05 AM

Another follow-up to my question: I decided to make the sword out of plastic. I'm going to sandpaper it down and wanted to know if the blade, despite being plastic, needs to be blunt?
"Although I’m weak and full of flaws, I will never stop moving forward. No matter who I am, no other than myself will create my own existence. No matter what others may think or feel, I will still move forward as myself.” - Oz Vessalius <3

~ACen 2013/2014 Cosplay~
Kuroko Tetsuya (KnB) and Ryuuko Matoi (Kill la Kill)

~ACen 2015 Cosplay~
Ryuuko Matoi (Kill la Kill); Kuroko Tetsuya (Kuroko no Basuke); Kuroo Tetsurou (Haikyuu!!); Shinkai Hayato, Arakita Yasutomo, and casual Hajime (Yowamushi Pedal)

#101 User is offline   cactusmomma 

  • Sage
  • PipPipPipPip
  • Group: Members
  • Member No.: 3528
  • Posts: 2,144
  • Joined: 06-January 05
  • Location:On the right of Gary, IN

Posted 14 April 2014 - 01:41 PM

Re: Eco-confetti

I'm going to say please don't..for the sole fact that it's like glitter.. even if it dissolves.. it still catches on other people and spreads, colonizes, and re-houses itself indoors.

#102 User is offline   Valkyrie 

  • Exhibit Space ADH
  • PipPipPipPip
  • Group: Assistant Department Head
  • Member No.: 3041
  • Posts: 1,276
  • Joined: 21-September 04
  • Location:Mundelein, IL

Posted 14 April 2014 - 02:26 PM

View PostXxNightrayLovexX, on 14 April 2014 - 11:05 AM, said:

Another follow-up to my question: I decided to make the sword out of plastic. I'm going to sandpaper it down and wanted to know if the blade, despite being plastic, needs to be blunt?


Because it's plastic, there's not as much of a concern. Our real concern lies in real, live-steel blades. Note, if you like, you can certainly make it somewhat blunted in case someone bumps into it. :)
ACen 2009 - Merchandising Staff
ACen 2010 - IRT Operative
ACen 2011-2013 - IRT Dispatch
Callsign: Valkyrie
"There is only one god. And his name, is Death. And there is only one thing we say to Death: 'Not today.'"

#103 User is offline   Raete Hytan 

  • Newbie
  • Pip
  • Group: Newbie
  • Member No.: 65359
  • Posts: 1
  • Joined: 18-April 14

Posted 20 April 2014 - 08:37 PM

Question about protrusions/spikes- are the type of spikes usually associated with punk clothing acceptable? I'm assuming since a lot of people have them on their non-costume clothing, that they are acceptable for costumes (as long as they're not the stabby, long kind)- but I just want to be sure- better safe than sorry.

#104 User is offline   Fimbulvinter 

  • Regular
  • PipPip
  • Group: Regular
  • Member No.: 58831
  • Posts: 142
  • Joined: 30-September 10
  • Location:Cary, Illinois

Posted 20 April 2014 - 09:06 PM

If I had a sword secured in a thick foam case but has a live steel hilt (with no poking edges or anything like that) is that allowed ?
!*~ACen 2015 Cosplays~*!

Kirishima Ayato- Tokyo Ghoul
Luvoratorrrrry! Kagamine Rin- Vocaloid
Nishinoya Yuu- Haikyuu!!
Foxfire Ahri- League of Legends

#105 User is offline   Jawahater 

  • Newbie
  • Pip
  • Group: Newbie
  • Member No.: 62984
  • Posts: 4
  • Joined: 09-January 13
  • Location:Homer Glen IL

Posted 23 April 2014 - 07:45 AM

View PostFimbulvinter, on 20 April 2014 - 09:06 PM, said:

If I had a sword secured in a thick foam case but has a live steel hilt (with no poking edges or anything like that) is that allowed ?


I would post a picture so that the staff would give you a better opinion on it
-----------------------------------------------------------------------
Anime and Airsoft <3
Conqurer of the Sith Empire
Savior Of the Jedi Order
"It's called a hologram. This is called a trap. And I'm calling you dead."- Boba Fett

#106 User is offline   Valkyrie 

  • Exhibit Space ADH
  • PipPipPipPip
  • Group: Assistant Department Head
  • Member No.: 3041
  • Posts: 1,276
  • Joined: 21-September 04
  • Location:Mundelein, IL

Posted 27 April 2014 - 05:08 PM

Sorry about the delayed responses, folks. Been pretty busy on the Life Front.

View PostRaete Hytan, on 20 April 2014 - 08:37 PM, said:

Question about protrusions/spikes- are the type of spikes usually associated with punk clothing acceptable? I'm assuming since a lot of people have them on their non-costume clothing, that they are acceptable for costumes (as long as they're not the stabby, long kind)- but I just want to be sure- better safe than sorry.


I'm guessing you're talking about the stuff one might find at Hot Topic or Spencers and the like? Yes, those are fine. :)/>


View PostFimbulvinter, on 20 April 2014 - 09:06 PM, said:

If I had a sword secured in a thick foam case but has a live steel hilt (with no poking edges or anything like that) is that allowed ?


View PostJawahater, on 23 April 2014 - 07:45 AM, said:

I would post a picture so that the staff would give you a better opinion on it


Okay, so...this one is a little tricky. Live steel, by ACen standards, is an an object crafted from metal that has a pointed or blade-like edge, whether blunt or sharp. That said, it'd be kinda hard to have a sword with a live steel hilt, as that might be a little difficult to, er, handle. However, if the hilt and/or sword (whether it's in a case or not) is in fact live steel by our definitions, then it will not be allowed as a prop. It will have to stay at home, in your room, or your car. But if the hilt and sword are not actually live steel, then it is okay to bring as a prop.
ACen 2009 - Merchandising Staff
ACen 2010 - IRT Operative
ACen 2011-2013 - IRT Dispatch
Callsign: Valkyrie
"There is only one god. And his name, is Death. And there is only one thing we say to Death: 'Not today.'"

#107 User is offline   YoiYumeo 

  • Bigfoot
  • Pip
  • Group: Bigfoot
  • Member No.: 64320
  • Posts: 77
  • Joined: 05-November 13

Posted 27 April 2014 - 10:05 PM

I'm also making a scythe this year and am in the process of trying to figure out what do with the blade to make it con acceptable. The blade itself is close to four feet in length made out of styrofoam with the rod going to be cut down, hopefully to just under my height so when fully made, it will be at my height. I was just wondering if I can't make it like this, is there a chance I could just bring it to the Vampire Knight photoshoot and then back to my room? I apologize for the stupid question, I have never brought a prop to a convention before and have seen people with ones bigger than themselves before.
ACen 2015 Line Up
Amu Hinamori - Shugo Chara ~ 60% [School Uniform] (Saturday Afternoon)
Haruka Nanami - Uta no Prince-sama ~ 96% [2000% Opening White Dress] (Friday/Saturday Morning)
Sei - DRAMAtical Murder ~ 96% (Friday Evening/Night)
Yuuki Kuran - Vampire Knight ~ 100% [Vampire] (Akira signing/Sunday)
Hosting Uta no Interview 3000% and DRAMAtical Not Murder (18+)

#108 User is offline   ShingekiNoFandoms 

  • Lurker
  • Pip
  • Group: Lurker
  • Member No.: 64955
  • Posts: 57
  • Joined: 23-January 14

Posted 02 May 2014 - 04:04 PM

Okay, so I feel like a question similar to this was answered, but I'll ask anyways because the thought of breaking any rules with a prop has been bugging me. I'm cosplaying a character who is blind, and planned to take the blind cane with as part of my cosplay, even though it isn't absolutely necessary. It doesn't exceed my height, but it might reach close to/past the six inch limit (The rules I'm reading on the ACen page says six inches, has that changed?) if I extended it a bit to walk as a blind person would. (Is it even okay to do that? I don't want to offend or mislead people to actually think I'm blind!)

Sorry, I'm a bit of a noob when it comes to these things, and I worry a lot about unintentionally breaking rules!

Edit: The cane is collapsable and could be carried as a prop rather than used for its intended purpose if needed.

This post has been edited by ShingekiNoFandoms: 02 May 2014 - 04:08 PM

ACen '15 plans: Squid Girl, Sasha Braus (SnK), possibly Kaneki Ken (Tokyo Ghoul) or another Horsehead!Jean attempt
ACen '14: Hanji Zoe (SnK), Terezi Pyrope (Homestuck), Horsehead!Jean Kirschtein (SnK)
ACen '13: Seborga (Hetalia), Chibitalia/Neko!Chibitalia (Hetalia)
Other cons- Anime World Chicago '12: (n00b cosplay that shall not be mentioned)

#109 User is offline   Nightmare47 

  • Newbie
  • Pip
  • Group: Newbie
  • Member No.: 61695
  • Posts: 6
  • Joined: 12-March 12

Posted 06 May 2014 - 12:33 PM

Hi all. I have a question regarding helmets. I've done a cosplay of Soul Calibur 2 Nightmare for a couple years now, and while I don't think there have been any issues, I wanted to make sure this year so there's no risk of unpleasantness.

On the helmet, there are two upward turned narrow bat wing like "ears". I'm not sure off hand (on lunch break at work) if they extend more than six inches or not. Usually I just carry the helmet with me instead of wearing it unless someone wants a picture/posing for photos (would rather avoid heatstroke).

My question is, if they're over six inches, will I have to trim/replace them, or since I carry it mostly instead of wear it, does that make it a prop instead?

Or are these simply rules for props and I'm just stressing out over nothing?

Thanks!

This post has been edited by Nightmare47: 06 May 2014 - 03:25 PM


#110 User is offline   Level-5 

  • Regular
  • PipPip
  • Group: Regular
  • Member No.: 62879
  • Posts: 113
  • Joined: 04-December 12

Posted 17 May 2014 - 11:03 PM

Question:

I'm cosplaying as Okita and I wanted to know if this prop was ok. I'm going to make a bazooka using something similar to this video:

http://www.citizen.t...AVGkGfi6e6.html

If that's not acceptable what do I need to add to make it ok?

#111 User is offline   Twifairy 

  • Regular
  • PipPip
  • Group: Regular
  • Member No.: 65191
  • Posts: 136
  • Joined: 19-March 14
  • Location:Chicago-ish

Posted 31 March 2015 - 07:05 PM

I will only be using this prop at Anime Midwest but I just want to ask opinions. I have a snap-open parasol for one of my costumes. I've tested it out and it's very easy to control, and it doesn't snap open all of a sudden and it won't hurts doodle out of the blue. There are no sharp parts, would that typically be okay for a con?
ACen 2015 Cosplay-
Saturday: Cinder Fall: 40% done

Anime Midwest 2015 Cosplay-
Friday:Neo (RWBY): 30% done
Saturday: Cinder Fall: 40% done
Sunday:Mikasa Ackerman: 60% done
Progress can be viewed here

#112 User is offline   ShingekiNoFandoms 

  • Lurker
  • Pip
  • Group: Lurker
  • Member No.: 64955
  • Posts: 57
  • Joined: 23-January 14

Posted 01 April 2015 - 12:09 PM

View PostTwifairy, on 31 March 2015 - 07:05 PM, said:

I will only be using this prop at Anime Midwest but I just want to ask opinions. I have a snap-open parasol for one of my costumes. I've tested it out and it's very easy to control, and it doesn't snap open all of a sudden and it won't hurts doodle out of the blue. There are no sharp parts, would that typically be okay for a con?


I'm no expert but I'd say if it's not too long and won't obstruct any traffic in any way (i.e. if it was sticking out too much and bumping other con-goers) then I'd say it's okay. If you're not sure, you can always ask someone if they do that kind of thing at Anime Midwest.
ACen '15 plans: Squid Girl, Sasha Braus (SnK), possibly Kaneki Ken (Tokyo Ghoul) or another Horsehead!Jean attempt
ACen '14: Hanji Zoe (SnK), Terezi Pyrope (Homestuck), Horsehead!Jean Kirschtein (SnK)
ACen '13: Seborga (Hetalia), Chibitalia/Neko!Chibitalia (Hetalia)
Other cons- Anime World Chicago '12: (n00b cosplay that shall not be mentioned)

#113 User is offline   Sarbear 

  • Newbie
  • Pip
  • Group: Newbie
  • Member No.: 68032
  • Posts: 5
  • Joined: 30-March 15

Posted 06 April 2015 - 01:10 PM

I have a question about my gun prop and I having trouble reading this correctly, so I apologize if this seems redundant.

Quote

The big thing to note is that gun-like props are no longer required to not be realistic. We only require three things of a gun-like prop:

It must have an orange tip.
It must be disabled.
It must be unloaded.

Posted Image
I am making these guns for my my arcade miss fortune cosplay but they will be constructed from foam core board and PVC pipe so in no way would they be to fire/shoot anything. Am I still required to place an orange cap on the ends even though there isn't any way it can be used like a normal gun prop? I'm just confused on that part and want to be sure before I take them to ACen.

#114 User is offline   KungPowKirby 

  • Addict
  • PipPipPip
  • Group: Addict
  • Member No.: 53583
  • Posts: 972
  • Joined: 07-April 10
  • Location:Des Moines, IA

Posted 06 April 2015 - 03:24 PM

View PostSarbear, on 06 April 2015 - 01:10 PM, said:

I have a question about my gun prop and I having trouble reading this correctly, so I apologize if this seems redundant.

Posted Image
I am making these guns for my my arcade miss fortune cosplay but they will be constructed from foam core board and PVC pipe so in no way would they be to fire/shoot anything. Am I still required to place an orange cap on the ends even though there isn't any way it can be used like a normal gun prop? I'm just confused on that part and want to be sure before I take them to ACen.


I believe all guns have to have the orange tip regardless of their construction.
"If this body is not capable of action, I suggest new leadership is needed. I move for a vote of no confidence in Chancellor Valorum's leadership."- Queen Amidala; Star Wars: Phantom Menace

#115 User is offline   C2Queen 

  • Publication Staff
  • PipPip
  • Group: Forum Staff
  • Member No.: 59630
  • Posts: 467
  • Joined: 06-March 11
  • Location:『チーズくんルーム。』

Posted 07 April 2015 - 04:45 PM

View PostSarbear, on 06 April 2015 - 01:10 PM, said:

I have a question about my gun prop and I having trouble reading this correctly, so I apologize if this seems redundant.

Posted Image
I am making these guns for my my arcade miss fortune cosplay but they will be constructed from foam core board and PVC pipe so in no way would they be to fire/shoot anything. Am I still required to place an orange cap on the ends even though there isn't any way it can be used like a normal gun prop? I'm just confused on that part and want to be sure before I take them to ACen.


No if they are made out of foam, obviously fake/unable to be fired or used as a real weapon it doesn't require an orange tip. The colors and style itself give away that the weapon is most likely not realistic/usable other than for being a prop. Which is why it wouldn't require the orange tip. Orange tips are more for realistic looking guns. They are great to have on any gun props in case for safety, but weapon props like this gun specifically aren't required to have one. I just confirmed this with I.R.T.

Though with each weapon prop anyone is unsure about, I'd confirm it with someone in I.R.T. since they are trained and check at con what is acceptable. Each case is different. Just ask yourself, does it look realistic? If yes, it needs an orange tip. If you are unsure, ask about it. Can it fire or is it usable? If yes, it needs to be disabled and unloaded. You also can't carry any ammo on your person. And the trigger also needs to be locked with weapons able to fire, I.R.T. will usually do it for you if you have one.
Anime Central 2015 Cosplay:
  • Sinon - Sword Art Online II (Gun Gale Online avatar)
  • Rikka - Chuunibyou demo koi ga shitai! (School Uniform)

For general questions & questions about forum registration -- EMAIL US or PM me personally.
PMing me is probably the faster way of receiving a response.

#116 User is offline   leenberry 

  • Newbie
  • Pip
  • Group: Newbie
  • Member No.: 68179
  • Posts: 1
  • Joined: 22-April 15

Posted 26 April 2015 - 08:34 PM

Hi everyone,

I am wondering if my cosplay prop is allowed, it is Princess Hilda's staff. I am 5'1 and the staff is approximately her size or a bit taller, which is why I am concerned.

Here is a picture for reference

PIC

If anyone can get back to me, that would be great!

#117 User is offline   Swimstud 

  • Newbie
  • Pip
  • Group: Newbie
  • Member No.: 67818
  • Posts: 4
  • Joined: 07-February 15
  • Location:East Lansing

Posted 27 April 2015 - 12:46 AM

So I know someone kind of asked the same question here but no one seemed to answer it. I have a scythe prop that is my height(6'3) and basically is right under the acceptable limit I believe. My question is that I have a sling for it so it can hang on my back and i'm wondering if it would still be allowed since when I attach it to my back the handle will have to extend higher(about 6-8 inches upward). I'm not sure if this would be a problem or not. In case anyone is wondering(maybe this could help) it's Hidan's Scythe from Naruto.
ACen 2015 Cosplay:

Friday: Celty Sturluson- Durarara!!
Saturday: Hidan- Naruto
Sunday: Morty(Ecruteak Gym)- Pokemon Silver & Gold

  • 4 Pages +
  • « First
  • 2
  • 3
  • 4
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users